3
GENERAL SAFETY INFORMATION
WARNING
Not to be installed in a ceiling thermally insulated to a value greater than R40. (This is required
for installation in Canada only.)
Never place a switch where it can be reached from a tub or shower.
A statement to the effect that when the product is to no longer be used, it must not be left in
place but removed, to prevent it from possibly falling.
Do not disassemble the unit for reconstruction. It may cause fire or electric shock.
Ceiling joist must be subjected to static load more than five times the weight of the product.
This product must be grounded.
CAUTION
Do not install this In-Line Fan where the temperature may exceed 60
℃
(140
°
F).
Make certain that the service supply voltage is 120V, 60Hz.
Follow all local electrical and safety codes as well as
the National Electrical Code (NEC) and the Occupation
Safety and Health Act (OSHA).
Always switch the power source off before working on
or near the fan or motor.
Protect the electrical wires from sharp edges, oil, grease,
hot surfaces, chemicals, or other objects.
Do not bend the electrical wires.
Do not install the unit where ducts are configured as
shown in Fig.A.
Provide suction parts with proper ventilation.
For general ventilating use only. Do not use to exhaust
hazardous or explosive materials or vapours.
Before installation, confirm that the unit is facing the
right direction. (Fig.B)
Do not drop the unit, put it on the hanger securely.
The special-purpose or dedicated parts, such as
mounting fixtures, must be used if such parts are
provided.
Fig.A
Fig.B
direction
up
up
up
