background image

INSTALLATION INSTRUCTIONS

In-Line Fan

Model No. 

FV-10NLF1E  FV-20NLF1  FV-30NLF1  FV-40NLF1

FV-10NLF1E  

FV-20NLF1  

FV-30NLF1  

FV-40NLF1

READ AND SAVE THESE INSTRUCTIONS

Thank you for purchasing this Panasonic product.

Please read these instructions carefully before attempting to install, operate or service the 

Panasonic product. Failure to comply with instructions could result in personal injury or 

property damage. Please explain to users how to operate and maintain the product after 

installation, and this booklet should be presented to users.

Please retain this booklet for future reference.

Contents

GENERAL SAFETY INFORMATION ....................................2~3
DESCRIPTION ......................................................................... 4

UNPACKING ........................................................................... 4

SUPPLIED ACCESSORIES ........................................................ 4

DIMENSIONS .......................................................................... 5

INSTALLATION I (HORIZONTALLY BETWEEN JOISTS) ......5~7
INSTALLATION II (ON CEILINGS/JOISTS) .............................. 7

INSTALLATION III (VERTICALLY ON JOISTS OR PILLARS) .... 8

MAINTENANCE ...................................................................... 9

PRACTICAL GUIDE TO INSTALLATION .................................. 9

SPECIFICATIONS................................................................... 10

PRODUCT SERVICE .............................................................. 10

Содержание FV-10NLF1E











Отзывы: