Panasonic FV-08VQL3 Скачать руководство пользователя страница 4

Protect the power cord from sharp edges, oil, grease, hot surfaces, 
chemicals, or other objects.

Do not kink the power cord.

Do not install the unit where ducts are configured as shown in Fig. A.

Provide suction parts with proper ventilation.

This unit is acceptable for use over a bathtub or shower when installed 
in a GFCI protected branch circuit.

General safety information continued

Fig. A

CAUTION:

1. For general ventilating use only. Do not use to exhaust hazardous 

     or explosive materials and vapors.

2. Not for use in cooking area. (Fig. B)

3. This product must be grounded.

WARNING:

Do not install this equipment in heating or air conditioning, air processing, or any other recirculated air ductwork.

4

5.

6.

7.

8.

9.

WARNING:

To reduce the risk of fire, electric shock, or injury to persons, observe the following;

Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the
manufacturer.
Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable
codes and standards,including fire-rated construction.
Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel
burning equipment to prevent backdrafting. Follow the heating equipment manufacturer's guideline and
safety standards such as those published by the National Fire Protection Association (NFPA), and the
American Society for Heating Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code
authorities.
When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
Ducted fans must always be vented to the outdoors.
If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.
Do not use this unit with any solid-state control device.
Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting
means to prevent power from being switched on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
NEVER place a switch  where it can be reached from a tub or shower.
Do not insulation rated greater than R40.

A.

B.

C.

D.
E.
F.
G.
H.

I.
J.

(Cooking area)

Do not install above or

inside this area.

Cooking

equipment

Floor

Fig. B

45

45

Содержание FV-08VQL3

















Отзывы: