15
(5) Output
(For windows 95)
C
Both PCL5e and PS
are the same screen.
For Windows NT 4.0:
Following items can be
set with printer setting
menu of application
software.
Setting up Print Condition
For Windows 95/98/Me/2000/NT 4.0
ATTENTION
No
Item
Default setting
Setting
#
Finisher Bin
Bin 1
Select the paper exit bin from the printer
when using FA-F320/F350/F355/F365/TR355
(option).
$
Output Order
Ascending
Ascending: Paper exit from the first page.
Descending: Paper exit from the last page.
%
Output Form
Face Up
Face Up:
When using inverting unit, it is
possible to select face up paper exit.
Face Down: Print out with print side down
&
Sorter
*
1
Stack
Stack (Group): Multiple prints of each original
are placed into separate bins.
Sort:
1 sheet of each original is placed into a
separate bin.
(available only selecting the sort mode)
Rotate: Grouped or sorted sheets are
separated rotation and exit onto tray.
Shift:
Grouped or sorted sheets are offset
and exit onto tray.
(
Staple
*
1
None
You can only use staple when sort is selected.
None, Left-1, Left-2, Right-1, Right-2
)
Duplex
*
1
(with Automatic
duplex unit)
None
None: It disables double sided printing.
Long Edge: Regular book format
Short Edge: Sketch book format
(Rotate mode of sorter can not be used)
*
Booklet
*
2
Off
Booklet requires the Automatic duplex unit.
It allows use with Filing settings.
Off
On: Prints will come out in book style.
Paper Source: Paper size setting (must be set)
(Ledger/Letter/A3/A4 only)
(FA-F365:Punch mode cannot be used)
(FA-F320/F350/F355: Staple and Punch mode
can not be used)
+
Punch
None
When using FA-F320/F365+SP30/40 (option),
it enables hole punch printing.
(Rotate mode of sorter can not be used)
-
Restore Defaults
Reset the setting of item
#
–
+
to default setting.
∗
1 All sorting selections must be made at the printer driver screen.
The collate option must be turned off in the application software.
∗
2 When using the booklet mode, descending and face down mode can not be used.
Descending mode of output order is selected:
If the printer image memory is full, change to the ascending mode or print the document
separately.
