Panasonic FA-DS72 Скачать руководство пользователя страница 114

Страница: 114 / 402

5-37

Troubleshooting

(5)

U6: Copier paper feed cover failure

*The copier does not indicate READY TO COPY when the copier paper feed cover is closed.

Is the paper feed cover closed securely?

Close the paper feed cover securely.

YES

Does CN5-7, 9, 11 (output signal of CPU)

Check DC5V of the tray detecting sensor.

change when the paper feed cover is

Detected: Cover sensor is defective.

opened and closed?

Not detected: Check DC5V line.

(6)

U7: System console (option) paper feed cover failure

*The copier does not indicate READY TO COPY when the system console paper feed cover is closed.

Is the paper feed cover closed securely?

Close the paper feed cover securely.

YES

Does CN611 (output signal of system

Check DC5V of the system console driver.

console driver) change when the paper

Detected: Cover sensor is defective.

feed cover is opened and closed?

Not detected: Check DC5V line.

YES

System console drive PCB is defective.

(Refer to system console Service Manual)

(7)

U10: ADF (option) failure

*The copier does not indicate READY TO COPY when the original is placed onto the original feed tray.

Is the ADF closed securely?

Close the ADF securely.

YES

Is the ADF entry cover closed securely?

Close the entry cover securely.

YES

Is the ADF exit cover closed securely?

Close the exit cover securely.

YES

Refer to the ADF Service Manual.

(8)

U11: Sorter copy paper removal

*When the Staple Sort or Sort mode is selected:

Copies are already in at least one bin.

Any bin receives more than 25 copies as a result of the use of the ADF.

Any bin receives a copy which is an unsuitable size for stapler use.

Any bin receives a double feed from the duplex unit.

NOTE: To clear U11, all paper must be removed from all bins.

Содержание FA-DS72



















































































































































































































































































































































































































Результаты поиска

Содержание FA-DS72

Отзывы:

Похожие инструкции для FA-DS72

Бренды по названию

Популярные бренды

Panasonic FA-DS72, Руководство по обслуживанию и каталог запасных частей

Результаты поиска

Содержание FA-DS72

Отзывы:

Похожие инструкции для FA-DS72

Бренды по названию

Популярные бренды