15
Econavi
(Indicator lights on)
Smart power-saving mode.
Press the button again to cancel. (Indicator lights off)
Press the button will operate in Econavi mode. Econavi is a smart
power-saving operation by combining the “patrol mode” with “learning
mode”, and it adjusts the air volume automatically. (P.23)
(When “Clean Air” or “Clean/Humid.” is set, Econavi can also be canceled
by pressing the button.)
Air Volume
Select appropriate air volume for purifying air or
humidifying.
The indicator will be changed sequentially as below each time the button is
pressed.
Purify air or humidify quickly.
Purify air or humidify in a medium speed.
(Indicator lights on)
Operate quietly in a low speed, and purify air or
humidify slowly.
Automatically adjust the air volume according to the
air pollution and humidity detected by sensors, and
purify air or humidify by optimal air volume.
(only for “Clean air and humidifying mode”, “Clean air mode”)
OPERATION
再次按下此按钮取消。(指示灯熄灭)
(当以“空气净化”或“加湿空气净化”模式运转时，可通过按 按钮进行
取消。)
使用方法
每按一下，指示灯将按下图顺序进行切换。
选择合适的风量净化空气或加湿。
(只适用于加湿空气净化模式、空气净化模式。)
根据感应器检测的空气污染程度和湿度，自动调节风量，利用
最佳的风量净化空气或加湿。
快速净化空气或加湿。
以中等速度净化空气或加湿。
低速安静地运转，但净化空气或加湿的速度相对减慢。
(指示灯亮起)
(指示灯亮起)
智慧节能
风量
按下按钮将以智慧节能模式进行运转。智慧节能是由“侦测模式”与“学习模式”组合
而成的省电智能运转模式，并能自动调节风量。(第
23
页)
省电智能运转。
OPERATION
使
用
方
法
