因感應器靈敏度差異影響可能出現此現象
。
氣味污染度顯示為什麼一直不發生
變化？
Such problems may occur because
of the difference in sensitivity of
PM2.5 sensor.
咨詢或送去維修之前
，
請先確認以下情況
。
出風口為什麼發出
“
嘰
”
的聲音
？
產生
nanoe
®
X
時
，
將發出些許該聲音
。
根據使用環境
、
運轉模式不同
，
聲音會大小
有所不同
，
這並非異常現象
。
PM2.5
數值為什麼不發生變化
？
因
PM2.5
感應器靈敏度差異影響可能
出現此現象
。
常見問題解答
FAQ
Please confirm the following before you put questions forward or send the product for repair.
There is a slight sound when nanoe
®
X
is being generated. Depends on the
environment and operation mode, the
sound may be a bit loud or inaudible
but it is not abnormal.
Why is a “jee” sound from
the emission outlet?
Why has the gas pollution
level display never changed?
Why does the PM2.5 figure
remain unchanged?
Such problems may occur because
of the difference in sensitivity of
PM2.5 sensor.
為什麼出風口會有異味吹出
？
過濾網的吸附能力達到飽和後
，
氣味也會因
吸附過盈而隨風再次被吹出
。
過濾網髒污後未清潔
。
The adsorption capacity of filter
reaches saturation, odor will also be
blown out again with the wind
because of excess adsorption.
The filter has not been cleaned after
getting dirty.
Why will air outlet blow out
the odor?
18
