Panasonic F-GMG01H, Руководство по эксплуатации

Страница: 14 / 32

Care and maintenance
Filter <about once every two weeks>
Requirements
Requirements
Body
When idle for a long time
Do not use the detergents shown on the right.
When using chemically treated cloth,
be sure to follow the instructions carefully.
Remove the filter
from the unit.
(The remove method
of the filter: P.11)
Wash it with water
to wash away the dust.
Dry the filter naturally
after washing.
Please wipe with a wrung soft cloth.
Do not wipe it with a hard cloth or
too much force. Otherwise, the
surface may be damaged.
Firmly adhered dirt
When the dirt is hard to clean,
please use a soft sponge to
clean by dripping a little neutral
detergent for kitchen purpose
on the sponge. After cleaning,
please wash away the detergent
and place it under the shade to
dry it naturally.
The filter is easy to damage.
Therefore, please do not press
or wipe forcibly while washing.
(The inhaled dust enters the
inside of the unit from the
damaged part and results in
errors.)
Cover them with a poly bag, and
keep them in a place with little
moisture.
Please do not operate the unit in which the filter is removed.
(The inhaled dust may enter the inside of the unit and result in errors.)
Tooth powder
Alkali detergents
Thinner
Bleach
Alcohol or Benzine
Disconnect the power plug or cigar
plug and unplug the plug from the body.
(The unit still consumes power
even at rest.)
Carry out care and maintenance.
Always before maintenance, be sure to unplug the power plug or the cigar plug
and disconnect plug used to connect the body to the unit.
In order to maintain the effect of , it is necessary to care and maintain the
filter diligently.
The dirtiness of the filter may vary with the usage environment.
Please clean it about once every two weeks, or take
care of it when the dust blocks the filter.
Is the adapter connected correctly and firmly?
Please connect it correctly and firmly. (P.11)
Is the louver closed?
Please open the louver. (P.12)
Is the filter dirty?
Please carry out care and maintenance. (P.14)
Are the unit and filter dirty?
Please carry out care and maintenance. (P.14)
When the ion is generated, one may
feel a small amount of ozone. However, it is not
harmful to human beings. (P.13)
There is a slight sound when is taking place.
Depending on the usage environment and
operation mode, the sound may seem to be loud
or inaudible but these are not abnormalities.
If the 8h off indicator is on, according to the function of the
8h Off Timer, the unit will stop operating automatically
8 hours later after the Power Off/On button is pressed.
To operate continuously, please press the
Power Off/On button and hold for about 2 seconds.
(P.12)
Now
The air volume
indicator of
“Hi” blinks.
Please confirm the following:
If a problem is encountered, investigate it by first referring to the table below.
If the problem still persists, please disconnect the power plug or cigar plug and unplug
the plug from the body and contact the dealer for repairs.
Troubleshooting
The unit cannot
operate.
The air volume is
small.
An unpleasant
odor comes out.
There is a “jee”
sound from the
emission outlet.
The operation
stops.
When the Power Off/On button is pressed again,
the unit will start under the mode of
“LOW” + 8h Off Timer
When you feel confused
Care and maintenance
Please disconnect the power plug or cigar plug
and unplug the plug from the body, and contact the
dealer for repairs.
Then is not generating.
Is the filter (air inlet) dirty?
Please carry out care and maintenance. (P.14)
Please disconnect the power plug or cigar plug and
unplug the plug from the body and operate the unit
again after care and maintenance.
If the indicator still blinks after repeating the action,
it indicates that an error has occurred to the unit.
14