Panasonic Electric Works Nordic AB
MEW01297 Rev: 2
Technical Description External Presentation Unit 1728, ver. 1.4.x
22
"FAULT: Comm, EPU xx, 1587 board x, CU xx"
The contact with the ext. Presentation unit is interrupted. Check
the cable, all connections and the 1582 / 1587 board. Is a
correct / complete SSD download (via Win512) performed?
Check the address setting (1582 / 1587 board / the ext.
Presentation unit), SW mode setting, etc. See also chapter
"Restart", page 19.
"FAULT: EPU xx, 1587 board x, CU xx"
The ext. Presentation unit is programmed (via Win512) as
another type of unit or there is a fault in the ext. Presentation
unit.
"FAULT: Fuse, 1587 board x, CU xx"
Check for blown fuse(s) on the 1587 board.
"FAULT: SSD, EPU xx, 1587 board x, CU xx"
See chapter "Restart", page 19.
10.2.2
System EBL128
"FAULT: No reply EPU x"
The contact with the ext. Presentation unit is interrupted. Check
the cable and all connections. Is a correct / complete SSD
download (via Win128) performed? Check the address setting,
SW mode setting, etc. See also chapter "Restart", page 19.
"FAULT: EPU x"
The ext. Presentation unit is programmed (via Win128) as
another type of unit or there is a fault in the ext. Presentation
unit.
"FAULT: Site specific data (SSD), EPU x
"
See chapter "Restart", page 19.
10.2.3
System EBL512 G3
"FAULT: No reply, external presentation unit xx,
Control unit xx"
The contact with the ext. Presentation unit is interrupted. Check
the cable and all connections. Is a correct / complete SSD
download (via Win512 G3) performed? Check the address
setting, SW mode setting, etc. See also chapter "Restart", page
19.
"FAULT: External presentation unit xx"
The ext. Presentation unit is programmed (via Win128) as
another type of unit or there is a fault in the ext. FBP.
"FAULT: External presentation unit xx control unit
xx"
The ext. Presentation unit is programmed (via Win512 G3) as
another type of unit or there is a fault in the ext. Presentation
unit.
Содержание External Presentation unit 1728
Страница 2: ...This page has deliberately been left blank ...
Страница 37: ...This page has deliberately been left blank ...