Panasonic External Presentation unit 1728, Техническое описание

Страница: 15 / 38

Panasonic Electric Works Nordic AB
MEW01297 Rev: 2 Technical Description External Presentation Unit 1728, ver. 1.4.x
13
NOTE!
If the stored SW mode is 1728 – 1582 a language has to be set before
the address can be set
8
. The following information will be shown in
the display:
LANGUAGE SETTING! Change = Black
Language: xxxxxxx Store = Yellow
XXXXXXX
can be changed to one of the following languages:
- English
- Danish
- Swedish
Scroll to the wanted language with the push button "P1" (black).
Store the selected language with the push button "P2" (yellow) and the
unit will automatically be ready for the "Address setting ", see below.
6.1.1 SW mode setting via jumper "J4"
An ext. Presentation unit in operation
7
will be ready for the "SW
mode setting" via the jumper "J4" in the unit. Shunt "J4"
momentarily.
9
When the ext. Presentation unit is ready for the "SW mode setting"
this is indicated by the LED "L2" (Alarms queued). The back-light is
turned on and the following information is shown in the display:
MODE SETTING! Change = Black
Type: xxxxxxxxxxxx Store = Yellow
Continue in accordance with chapter "SW mode setting", page 12.
6.2 Address setting
After the SW mode setting or after the language setting (see above),
the ext. Presentation unit is ready for the "address setting".
As an alternative, one
10
ext. Presentation unit in operation can be
ready for the "address setting" directly via a c.i.e. menu. See the
following chapter.
When the ext. Presentation unit is ready for the "address setting" this
is indicated by the LED "L2" (Alarms queued). The back-light is
turned on and the following information is shown in the display:
ADDRESS SETTING Change = Black
Address: XX Store = Yellow
XX can be changed to the following:
8
If the stored SW mode is 1728 – 1587 a language will be downloaded via
the c.i.e.
9
If "J4" is not removed, the ext. Presentation unit will not enter its normal
operation mode after the restart but start from the beginning again, ready for
the SW mode setting.
10
Or all the ext. Presentation units connected to the same Ext. FBP / DU
interface board 1587.