27
English
Mode
Description
“
喷射
” (JET) mode
• This mode is for removing food
particles trapped between the teeth.
“
气泡(普通)
” [AIR IN (REGULAR)]
mode
• This mode is for periodontal pocket
cleaning and gum care.
“
气泡(轻柔)
” [AIR IN (SOFT)] mode
• This mode is for gently massaging
the gums.
Notes
• When you use the appliance for the first time,
press the “
开关
” (power) switch to turn the
appliance on and test each of the water jet
modes with the tank filled with water.
• The appliance may not operate in an ambient
temperature approximately 5 °C or lower.
• Do not hold the tip of the nozzle firmly against
the teeth or gums.
• Since plaque adhering to the surface of teeth
cannot be removed only with water flow,
brushing is always necessary. It is
recommended to clean inside your mouth with
water flow after brushing your teeth.
• Do not operate the main unit when empty other
than when pouring out any remaining water
after use. Operating the main unit without water
may result in a malfunction.
5
5
Place the nozzle in your
mouth and close your mouth
gently before pressing the
“
开关
” (power) switch�
• To use, place your face over a
washbasin, and with the main
unit upright and the nozzle at
the top, raise your elbow.
• Pressing the “
选择
” (mode) switch during use will
change the mode.
• A fully filled water tank provides approximately 35
seconds of use.
• If the nozzle is inclined too much, water will come
out of the ventilation hole instead of the nozzle.
(The ventilation hole in the rear of the main unit
allows for easier water suction of the hose.)
Turn the nozzle handle to adjust
the direction of the water flow.
6
6
After use, press the “
开关
” (power) switch
to turn off the main unit�
• Stop operation with the nozzle still in the mouth to
prevent water from splashing.
EWM1311_CH.indb 27
2018/11/16 17:07:50