EN13
Using the Toothbrush
1.
Place the brush head firmly onto the toothbrush shaft.
2.
Place the toothbrush in your mouth.
3.
Press the power switch to turn on the main unit.
Ensure that the direction is correct.
Align the front of the main unit and the front of the
brush head.
Do not attach the brush head by twisting it into place.
(Doing so may damage the brush head and main unit.)
The toothbrush shaft will move when a force is applied.
This is required for operation, and is not a malfunction.
There is a small gap between the brush head and the
main unit (a few mm). This is necessary for operation
and is not a malfunction.
To avoid spattering of toothpaste, put the brush head in
your mouth before turning the power on.
Apply a small amount of toothpaste.
Move the brush head with the bristles lightly touching
your teeth.
When first using this appliance, some people may
experience a tickling or tingling sensation caused by the
sonic vibrations.
The sensation should subside after you use the
toothbrush several more times.
A sound may be heard when the brush head is
pressed too strongly against the teeth, but this is not a
malfunction.
Notes
Recommended ambient temperature for using is 5 °C – 35 °C.
Toothbrush may not operate outside recommended temperature range.
Do not put the main unit in contact with hair products, hand creams, etc.
(Doing so may damage the exterior.)
EW-TDEF4.indb 13
EW-TDEF4.indb 13
2015/10/14 13:51:11
2015/10/14 13:51:11
EN14
English
4.
Select the mode.
Each time you press the power switch, the mode changes.
(When you turn the power on, the unit is in NORMAL mode.)
Mode
Description
Brush head
NORMAL
Recommended for normal brushing.
SOFT
Recommended when you feel the
NORMAL mode is too powerful.
GUMCARE
Uses rhythmical vibrations to care for
your gums.
5.
Turn off the main unit when you have finished brushing.
Turn off the main unit before removing it from your mouth to prevent saliva
from spattering.
Brushing (P. EN15)
Brush difficult-to-reach areas (P. EN16)
Care for gums (P. EN17)
The very weak electric current may
not pass into the oral cavity if the
toothbrush is held in the same way as
a pen so that your hand does not touch
the ion panel.
Please grasp the main unit as shown
in the right figure, so that your hand
comes in contact with the ion panel.
Ion panel
Grasp
Pen grip
EW-TDEF4.indb 14
EW-TDEF4.indb 14
2015/10/14 13:51:11
2015/10/14 13:51:11
Refine_15-10-14
13:55:45
Refine_0014_EW-TDEF4.p1.pdf
Refine_0015_EW-TDEF4.p1.pdf
Refine_15-10-14
13:55:45
B640462_EW-TDEF4_tori
8
15-11-13
17:27:40
