6
14
EVB-NN30312A
User’s Guide
for Evaluation Board
Revised
Total Pages
Page
Tentative
Industrial Devices Company, Panasonic Corporation
Regulations
No.
312A805E
2012-04-17
2.2 Jumper Setup
EN pin, MODE pin, FSEL pin, PGOOD pin are able to be controlled by J-EN, J-MODE, J-FSEL, J-PGOOD.
Jumper
Mode
FCCM
SKIP
SKIP
Table 3. J-MODE (Control modes
)
J-MODE
J-MODE
Table 4. J-FSEL
(
Control SW frequency
)
Table 5. J-PGOOD (Control the Voltage PGOOD pin pulled up to
)
Jumper
Status
enable
disable
disable
Table 2. J-EN (Control enable/disable
)
J-EN
J-EN
Jumper
Frequency
250kHz
750kHz
1250kHz
J-FSEL
J-FSEL
Jumper
Pull up to
VREG
open
V-EXT
J-PGOOD
J-PGOOD
J-EN
J-MODE
J-FSEL
J-PGOOD
Figure 3. Appearance of J-EN, J-MODE, J-FSEL, J-PGOOD
Note: The parameters above is subject to change without notice for improvement.