Panasonic EVB-NN30312A, Руководство пользователя

Страница: 10 / 15

10 14
EVB-NN30312A
User’s Guide
for Evaluation Board
Revised
Total Pages Page
Tentative
Industrial Devices Company, Panasonic Corporation
Regulations
No. 312A805E
2012-04-17
Reference Designator QTY Value Description Size *4 Manufacturer Part Number
C1, C2,C3 - - - - - -
C-AVIN1 2 10uF Capacitor, Ceramic, 50V, X7R, 20% 1210 TAIYO YUDEN UMK325AB7106MM-T
C-AVIN2 1 0.1uF Capacitor, Ceramic, 100V, X7R, 10% 0603 Murata GRM188R72A104KA35L
C-BST 1 0.1uF Capacitor, Ceramic, 100V, X7R, 10% 0603 Murata GRM188R72A104KA35L
C-DCDCOUT 3 22uF Capacitor, Ceramic, 25V, X7R, 10% 1210 Murata GRM32ER71E226KE15L
C-FSEL - - - - - -
C-PVIN1, C-PVIN2,
C-PVIN3, C-PVIN4 - - - - - -
C-PVIN5 2 10uF Capacitor, Ceramic, 50V, X7R, 20% 1210 TAIYO YUDEN UMK325AB7106MM-T
C-PVIN6 1 0.1uF Capacitor, Ceramic, 100V, X7R, 10% 0603 Murata GRM188R72A104KA35L
C-SS 1 10nF Capacitor, Ceramic, 100V, X7R, 10% 0603 Murata GRM188R72A103KA01L
C-VREG 1 1.0uF Capacitor, Ceramic, 25V, X7R, 10% 0603 Murata GRM188R71E105KA12L
D-BST - - - - - -
D-LX1, D-LX2 - - - - - -
J-EN, J-FSEL,
J-MODE, J-PGOOD - - - - - -
L-LX 1 1.0uH Inductor, 13A, 7.1m
Ω
7.1
×
6.5 mm
TDK SPM6530-1R0M120
R1,R2,R3 - - - - - -
R-AVIN 1 0 Resistor, Chip, 0.1W 0603 Panasonic ERJ3GEY0R00V
R-FB1 *2 1 3.3k Resistor, Chip, 0.1W, 1% 0603 Panasonic ERJ3EKF3301V
R-FB2 *2 1 1.2k Resistor, Chip, 0.1W, 1% 0603 Panasonic ERJ3EKF1201V
R-RB3 *2 1 1.0k Resistor, Chip, 0.1W, 1% 0603 Panasonic ERJ3EKF1001V
R-FB4 *2 1 0 Resistor, Chip, 0.1W 0603 Panasonic ERJ3GEY0R00V
R-FB6 1 0 Resistor, Chip, 0.1W 0603 Panasonic ERJ3GEY0R00V
R-FB5, R-FB7 - - - - - -
R-FB9 *3 1 0 Resistor, Chip, 0.1W 0603 Panasonic ERJ3GEY0R00V
R-FB8, R-FB10,
R-FB11 *3 - - - - - -
R-PG 1 100k Resistor, Chip, 0.1W, 1% 0603 Panasonic ERJ3EKF1003V
5 Bill of Materials
*2 : These resistors determine output voltage.
The setting in the
above
table sets the output voltage for 3.3V.
To change the output voltage, it is necessary to change these resistors following Equation (1) in the section 4.2.
*3 : These pads are for changing feedback route.
Only R-FB9 is
normally installed
.
*4 : These values comply with EIA standards.
Table 9 presents the bill of materials for the Evaluation Board.
Table 9. Evaluation Board Bill of Materials
Note: The parameters above is subject to change without notice for improvement.