INSTALLING TANDEM PROJECTIONS
INSTALLATION PROCEDURE
female bolt
locking pin
male bolt
Place the upper framed projector on top
of the lower framed projector. Make sure the four male bolts
seat into the correspondent female
bolts. To secure, push the locking pin through both
bolts, and confirm the snap.
ADJUSTMENT OPTIONS
Using the left and right ratchets you can
adjust the projector tilt by approximately
five degrees. You can lower or lift the whole
front or the left or right corners alone.
ratchet
By turning the round knob
on the side of the
frame, you can rotate the back of the projector,
to the left or right by approximately five degrees.
round button
6.