ASSEMBLY PROCEDURE
(2)Screwdriver
size and location of the screen as well as the lens (sold separately)
In case of tandem projection: Install the lower projector first,
(see adjustment option, page 5). In case of tandem projection,
INSTALLING THE PROJECTOR
INSTALLATION PROCEDURE
Place the frame on the projector and
align the
screw hole positions.
(Make sure that the front/rear direction is correct
when installing. If the direction is reversed, the
hole positions will not line up.)
Secure the projector to the frame using the six
screws (M6x30) and the twelve flat washers. Glue
the washers to the frame base if desired (M6).
Tightening Torque: 4 ± 0.5 Nm
flat washers (M6)
4.
Screw (M6x30)
1.
Preparation.
Prepare the tools.
(1)Adjustable spanner or Allen key
(3)Soft cloth or other soft fabric
Check the load capacity of the set-up location.
2.
Check the frame.
Check the structural components.
3.
Determine the setting-up position.
Select the position for the projectors based on the
to be used.
4.
Install the projector(s).
Please see below.
followed by the upper projector.
5.
Carry out adjustments.
Adjust so that the image fits perfectly on the screen
adjust until images projected by the upper and lower projectors
converge on the screen.