ENGLISH
- 9
7) Connect the power plug, press the power <
v
/
b
> button on the control panel or
on the remote control.
8) While pressing the
a
button on the control panel, press and hold the <INPUT/
ENTER> button on the control panel for 8 seconds or more.
z
The lamp counter will be reset to 0. (At this time, there is displaying nothing.)
9) Press the <INFO.> button on the remote control.
z
The [Info.] screen is displayed.
For more details, please refer to the "Operating Instructions - Functional Manual" of the
projector.
To download the "Operating Instructions – Functional Manual", please visit the Panasonic
website (https://panasonic.net/cns/projector/).
z
Make sure that the display of the [Lamp counter] is reset to [0 H].
z
Please try Step 8) again if the lamp counter has not been reset.
Attention
z
The lamp contains mercury. When disposing of the used lamp unit, ask your nearest local
authorities or dealer about proper disposal of the unit.
z
After unpacking the lamp unit, discard the packaging material properly.
Replacing the lamp unit ( continued )
