Panasonic ET-JPF200BE, Руководство по эксплуатации

Страница: 8 / 16

8 - ENGLISH
Mounting procedure (continued)
Mounting the floor stand to the projector
This section describes mounting the floor stand to the projector.
Main unit
Power supply unit
Bench to adjust height
Soft cloth or alike
Workbench
1) Place the projector on the work bench.
z
Place the power supply unit of the projector on
a work bench that has a soft cloth or the like
laid on it.
z
Also put the main unit of the projector on a
platform laid with a soft cloth or alike to make it
stable.
Attention
z
The projector might turn unstable in this case,
so at least two people are recommended to
perform the mounting work of the floor stand.
Rubber feet
2) Orient the floor stand to match the projector
orientation.
z
Place the floor stand so that the
rubber feet are facing upward and then orient it
to match the projector orientation.
3) Mount the floor stand to the projector.
z
Align the opening in the floor stand with the
position of the protrusion on the projector.
Protrusion
Opening