Panasonic ET-JPF200BE, Руководство по эксплуатации

Страница: 10 / 16

10 - ENGLISH
Mounting procedure (continued)
Connecting the power cord to the projector
This section describes connecting the supplied power cord to the projector.
To prevent disconnection of the power cord, use the supplied power cord and firmly insert the connector
all the way into the <AC IN> socket of the projector and then secure it in place.
For details on the handling of the power cord, refer to “Read this first!” (

page 3).
■ Power cord connection procedure
Connector
<AC IN> socket
1) Check the shapes of the <AC IN> socket of the
projector and the connector of the power cord
and then orient the connector correctly and
insert it firmly.
Guides
Connector secure
lock
Rib
Connector
Rib
Connector
secure lock
Power supply unit
2) Attach the connector secure lock.
z
Attach the connector secure lock supplied with
the projector by sliding it along the guides on
both sides of the <AC IN> socket of the power
supply unit.
When attaching it, make sure that the connector
of the power cord fits further inside (power
supply unit) than the ribs on the connector
secure lock.