ENGLISH
- 5
* The illustration for the next procedure uses PT-EZ590 as an example.
Detaching the lens
Lens release button fixing screw
Lens release button fixing screw hole
Before removing the projection lens, if the lens release
button cannot be released the lock even if you press
it, proceed the step
1)
and
2)
.
1) Place the projector upside down on a soft
cloth.
2) Use a Phillips screwdriver, remove the
lens release button fixing screw by turn-
ing it in the lens release button fixing
screw hole in the counterclockwise direc-
tion.
i)
Projection lens
Lens release button
iii)
ii)
3) Turn the projection lens completely in the
counterclockwise direction while press-
ing the lens release button to detach the
lens.
Attention
z
Attach the supplied lens caps before storing the
lens.
Attaching the lens
Red marks
Guide groove
Projection lens guide
Guide groove
Projection
lens guide
Projection lens
1) Align the red mark on the projection lens
with the red mark on the projector, and
insert the projection lens to the end.
2) Turn the projection lens clockwise until it
clicks.
Attention
z
Turn the projection lens counterclockwise to
confirm that it does not come out.
J
Lens release button fixing screw
The lens release button is held down by using the lens release button fixing screw (sup
-
plied in the accessories of the projector), and the projection lens cannot be removed.
When mounting it to the projector, refer to the steps
1)
to
2)
of “Detaching the lens“.
Detaching the lens / Attaching the lens (continued)
