8-ENGLISH
Projection relationships
The dimensional relationship between the screen and the projector is shown below.
■
Dimensional relationship diagram
L (LW/LT)
L (LW/LT)
SW
SH
H
SH
SW
SD
L1
L1
Screen
Projected image
Note
z
This diagram assumes that the size and position of the projected image will be adjusted so
that the image fills the entire screen.
z
This illustration is not drawn to scale.
L
Projection distance
LW
Minimum distance
LT
Maximum distance
L1
Lens protrusion dimension
SH
Projected image height
H
Distance from the lens center to the lower edge of the projected image
SW
Projected image width
SD
Projected image size
z
Dimension for L1 (approximate values)
(Unit: m)
Projector model
Dimension for L1 (approximate values)
PT-MZ880 / PT-MZ780 / PT-MZ680
0.275
Note
z
The illustrations of projectors in this manual are for informational purposes only and do not
represent a specific projector model. Configurations may vary with the model.
Attention
z
To prevent blocking of the intake and exhaust vents, maintain clearances from walls and objects
of at least 1 000 mm (3'3") for the exhaust vent and at least 500 mm (1'8") for the intake vent.
z
Avoid setting up in places which are subject to sudden temperature changes, such as near
an air conditioner or lighting equipment (studio lamps, etc.).
