ENGLISH-7
Preparation (continued)
Setting the lens type
Confirm the [LENS TYPE] setting for PT-MZ880 / PT-MZ780 / PT-MZ680.
Change the setting if the type does not match this projection lens.
1) Turn on the projector to start
the projection.
2) Press the <MENU> button to
display the [MAIN MENU] screen.
3)
Select [PROJECTOR SETUP] in
the main menu and then press
the <ENTER> button.
4) Select [LENS] in the [PROJECTOR
SETUP] menu and then press the
<ENTER> button.
z
The [LENS] screen appears.
5)
Select [LENS TYPE] on the [LENS]
screen and then use the ▲▼
buttons to select [ET-ELU20].
6)
Press the <ENTER> button.
2/2
MENU SELECT
SUB MENU
PROJECTOR SETUP
FUNCTION BUTTON
LENS
AUDIO SETTING
FILTER COUNTER
DC OUT
ON
STATUS
DATA CLONING
SAVE ALL USER DATA
LOAD ALL USER DATA
HDMI CEC
ON
INITIALIZE
SERVICE PASSWORD
ENTER
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
1/2
Lens calibration
Perform lens calibration after attaching the lens.
For instructions on lens calibration, refer to “Projecting” in the operating instructions for
the projector.
