17
Engli
sh
▼
There are two ways to clean the shaver,
depending on the actual dirt level�
▼
▼
To remove light dirt
To remove heavy dirt
4. Slide the cleaning
shutter until it clicks.
5. Clean the outer foil
section with running
water.
6. Turn the shaver off.
•Rinse with water and
shake up and down
several times to
remove the water.
4. Turn the shaver off.
5. Remove the outer foil
section.
6. Clean the shaver and
the outer foil section
with running water.
•Rinse with water and
shake up and down
several times to
remove the water.
▼
▼
▼
▼
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the
shaver, and the trimmer completely.
•Allow the shaver to dry in the
shade, avoid direct sunlight.
9. Lubricate the shaver.
It will keep the movement of the
blade smooth and maintain a
comfort shave.
1. Apply one drop of oil to each
of the system outer foils.
2. Raise the trimmer and apply
a drop of oil.
3. Switch the shaver on, and run it
for approximately five seconds.
4. Switch off the shaver, and
wipe off any excess oil from
the system outer foil with a
soft cloth.
►
Notes
•Do not use any kitchen or bathroom detergents other
than hand soap.
Doing so may cause malfunction.
•Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or
discoloration of the parts.
Wipe with diluted soapy water.
ES-ST6S_2S_TW.indb 17
2020/12/22 16:48:51
