5
English
•
A full charge will supply enough power for approx. 7 shaves of 3
minutes each. (This will differ depending on usage.)
You cannot operate the shaver while charging.
Shave
Using the shaver
1
1
Press the power
switch.
2
2
Hold the shaver as
illustrated above and
shave.
Start shaving by applying gentle pressure to your face. Stretch
your skin with your free hand and move the shaver back and
forth in the direction of your beard. You may gently increase the
amount of pressure as your skin becomes accustomed to this
shaver. Applying excessive pressure does not provide a closer
shave.
You can also use a pen grip to hold
the shaver.
Caution
•
Before shaving, check that the cleaning shutter is closed.
•
Do not place your fingers on the power switch while using the
shaver. This may cause the shaver to turn off.
•
Do not use shaving creams or face cleansers containing
scrubbing compounds as these may cause the outer foil to
clog.
Using the trimmer
Slide the trimmer handle up. Place
at a right angle to your skin and
move downwards to trim your
sideburns.
•
We recommend using the shaver in an ambient temperature
range of 0 ‑ 35 °C. If used outside this range, the appliance may
stop operating.
Clean
Cleaning the shaver
1. Remove the shaver from the AC adaptor.
2. Apply some hand soap and some water
to the outer foil.
•
Close the cleaning shutter.
3. Turn the shaver on.
3
