37
English
How to use
Shaving beard
1
Press
and shave.
•
The “shaving sensor”, which
automatically adjusts the power
depending on the beard thickness, will
operate.
It will shave with high power on areas
where the beard is heavy, and reduce
the power on areas where the beard
is thin, to reduce burden on the skin.
•
The power cannot be turned on when the switch
lock lamp ( ) blinks, as the power switch is locked.
Press the power switch for more than 2 seconds to
unlock.
(See page 38.)
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver
over the face against the grain of
the beard.
•
The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
•
To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
2
Press
when finished.
While using
After use
The used time and
remaining battery capacity
are shown and then turn
off after 7 seconds.
•
The shown time returns to
[0’00”] after 10 minutes.
•
The shaving sensor
lamp ( ) blinks.
•
The charge status lamp
( ) glows when using
cord shaving.
The used time and
remaining battery capacity
blink alternately and then
turn off after 8 seconds.
When the battery capacity is low
“10%” appears and “ ” blinks.
•
You can shave 1 to 2 times after “10%”
appears. (This will differ depending on usage.)
ES-LV9A_CH.indb 37
2016/03/11 9:54:00
