35
English
Preparation
Charging the shaver
•
Turn the shaver off.
•
Wipe off any water droplets on the main body rear terminals.
1
Insert the appliance plug into
the self‑cleaning recharger.
2
Remove the protective cap
while pressing the side of the
cap and insert the shaver into
the self‑cleaning recharger.
•
Slowly insert the shaver into
the self‑cleaning recharger
taking care not to damage the
system outer foil.
1
2
3
3
Plug the adaptor into a household outlet.
•
Check that the charge status lamp ( ) is glowing.
•
Charging is completed after approx. 1 hour.
4
Disconnect the adaptor after charging is completed.
While charging
After charging is completed
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
The battery capacity
lamp and will light up
and then turn off after
5 seconds.
Notes
•
When charging the shaver for the first time or when it
has not been in use for more than 6 months, the
charging time may change or the charge status lamp
( ) may not glow for a few minutes. It will eventually
glow if kept connected.
•
Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge, or the charge
status lamp ( ) will blink quickly and the battery may fail
to charge properly in extremely high or low temperatures.
•
The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute shave use per day)
The number of usable days varies depending on the
following conditions.
-
Beard thickness
-
Pressure applied to the skin
-
Ambient temperature
-
Usage frequency of the sonic vibration cleaning mode
•
If there is noise from radio or other source while using
the shaver, move to a different location to use the shaver.
ES-LV9A_CH.indb 35
2016/03/11 9:53:56
