Panasonic ES?LV95, Руководство по эксплуатации

Страница: 21 / 406

21 TR
R
O
H
SK
CZ
PL
FIN
S
N
P
DK
E
NL
I
F
D
GB
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of
the self‑cleaning recharger. Follow the steps below to remove
them. We recommend doing this each time you change the
cleaning liquid.
1. Be sure to remove the cleaning liquid
unit [
B 
] and the appliance plug [
C 
]
from the self‑cleaning recharger [
B
].
• Be careful not to spill the cleaning liquid.
•
Some cleaning liquid components and
skin oil may separate and adhere to the
cleaning liquid unit and cleaning liquid
filter. This does not indicate a problem.
2. Pour water as illustrated while
tilting the cleaning liquid unit
and shaking it gently.
•
You can clean with the
cleaning liquid filter removed.
•
After washing, be sure to
attach the cleaning liquid filter.
3. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened
with water.
•
Clean the corners and uneven parts of
the cleaning tray with a cotton swab
dampened with water.
► When the water does not drain from the cleaning
tray
Beard trimmings may clog the drain at the
bottom of the cleaning tray.
In this case, you cannot clean or dry the
shaver.
Push the beard trimmings down through the
drain with a toothpick etc.
Troubleshooting
►
Self-cleaning recharger
Problem Action
The blade has not been
thoroughly washed.
If the shaver is not cleaned for
more than 2 weeks, first clean
with the cleaning brush to
remove beard trimmings.
(See page 19.)
Do not add detergent and water
except when replacing the
cleaning liquid.
Doing so may deteriorate the
cleaning function. (See page 17.)
After cleaning, oil‑like droplets
may remain on the outside of
the foil frame. This is the
lubricating component of the
cleaning liquid and does not
indicate a problem. You may
wipe it off with a soft cloth.
ES-LV95_EU.indb 21 2013/07/04 18:43:14