10
English
Lubrication
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
. Apply one drop of oil to each of the outer foils.
. Raise the trimmer and apply a drop of oil.
. Switch the shaver on, and run it for approximately
five seconds.
5. Switch off the shaver, and wipe off any excess oil
from the outer foils with a soft cloth.
2
3
It is not necessary to oil the blades after cleaning the shaver with
the self‑cleaning recharger. (Lubricant is included in the cleaning
detergent.)
Cleaning with the brush
Clean the inner blades using the short brush
by moving it in direction (A).
Clean the system outer foil, the shaver body
and the trimmer using the long brush.
Do not move the short brush in direction (B)
as it will damage the inner blades and affect
their sharpness.
Do not use the short brush to clean the outer
foils.
•
•
(A)
(B)
•
Replacing the system outer foil and the inner blades
system outer foil
once every year
inner blades
once every two years
Replacing the system outer foil
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Press the system outer foil release buttons
and pull down the system outer foil.
. Align the foil frame mark (
) and the system
outer foil mark ( ) and securely attach
together.
The system outer foil cannot be reversely
attached.
Always insert the system outer foil to the foil
frame when attaching to the shaver.
. After turning the foil frame mark (
) to the
front, securely attach the outer foil section to
the shaver until it clicks.
•
•
1
2
3
Replacing the inner blades
1. Press the foil frame release buttons and lift
the outer foil section upwards.
. Remove the inner blades one at a time.
Do not touch the edges (metal parts) of the
inner blades to prevent injury to your hand.
. Insert the inner blades one at a time until they
click.
•
1
2 3
