32
English
Reading lamps when using
While using
Approximate amount of battery capacity
is displayed.
•
It will turn off approximately 5 seconds
after operating the power switch.
•
The shaving sensor lamp ( ) blinks.
When the battery capacity is low
“10%” appears and “ ” blinks
for
5 seconds
.
•
You can shave 2 to 3 times after “10%” appears.
(This will differ depending on usage.)
•
The shaver can be used for approximately 2 weeks
with a full charge.
(Based on one 3‑minute dry‑shave use per day until
the battery is exhausted)
•
The number of usable days varies depending on the
following conditions.
-
Beard thickness
-
Pressure applied to the skin
-
Ambient temperature
-
Usage frequency of the sonic vibration cleaning mode
Cleaning the shaver
Do not use kitchen, bathroom, or toilet detergents. Also,
do not wipe with thinners, benzine, alcohol etc.
Doing so may result in malfunction.
1. Turn the power switch OFF, and disconnect the AC
adaptor.
•
Unlock the switch lock.
2. Apply some hand soap and some water to the
system outer foil.
3. Press the power switch for more
than 2 seconds to activate the
sonic vibration cleaning mode.
•
The battery capacity lamps blink
in order.
•
After about 20 seconds, it will be
automatically turned off.
4. Remove the outer foil section and
press the power switch for more
than 2 seconds to activate the
sonic vibration cleaning mode.
5. Clean the shaver, the outer foil
section, and the trimmer with
running water.
•
After rinsing with water, shake
the shaver up and down for a few
times to remove excess moisture.
Hitting the vanity, etc., while shaking the shaver may
cause malfunction.
ES-LT5N_CH.indb 32
2016/01/29 17:12:53
