2
ER-VW
Selectable charge removal layout
Nozzle angle adjustment and joint layout can be selected as desired
Nozzle angle adjustment mechanism
The angles of the two nozzles can be adjusted within a range of approximately 190° by screwing down the ends of
the nozzles. After adjusting the angle, turn the ends of the nozzles to tighten them and secure them at that angle.
This allows the nozzle angles of the
ER-VW
to be adjusted easily after installation.
Installation examples
Includes angle
adjustment scale
Easy connection layout possible
The joint kit (optional) can be used to
connect up to a maximum of 5
ER-VW
units. The air supply part is connected via
quick connection joints, and the power
supply and input/output signals can also be
connected easily using connection cables
with connectors at both ends.
Multiple
ER-VW
units can be connected
together to provide charge removal layouts
that suit the target equipment.
End connector (Accessory)
Cable with connector (Accessory)
Air
supply
Joint kit (1 kit required for each pair of devices)
Cable with connector on both ends
Used to connect power supply, input/output and ground.
1
1
1
1
1
Air joint (for replacing plug with hexagonal hole)
Used to supply air.
2
2
2
2
2
Connection application example
Thin Type Ionizer
High-frequency AC Method
Vertical
installation
example
Horizontal
installation
example
Certified by
NRTL
