background image

Operating Instructions

(Household)

AC/Rechargeable Hair Clipper

Model No. ER-GC70/ER-GC50

Before operating this unit, please read these instructions completely and save them for future use.

 

EN

Printed in China

0000000000  X0000-0

Panasonic Electric Works Wanbao (Guangzhou) Co., Ltd.

http://panasonic.net

Thank you for choosing a Panasonic AC/Rechargeable Hair 
Clipper. Please read all instructions before use.

Important

This clipper has a built-in rechargeable battery. Do not throw into 
fire, apply heat, or charge, use, or leave in a high temperature 
environment.

Using the clipper

Check that the blades are not damaged or deformed before 
use.
Terminate the usage when there is abnormality or failure.
Turn off the appliance before changing the trimming length or 
removing the comb attachment.
Before each use, apply oil at the places marked with arrows. 
(See page 6.)
The appliance should not be used on animals.
Do not press the blade against the skin.
Do not use the clipper for any purpose other than trimming.
This appliance is not intended for use by persons (including 
children) with reduced physical, sensory or mental capabilities, 
or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the 
appliance by a person responsible for their safety. Children 
should be supervised to ensure that they do not play with the 
appliance.

Charging the clipper

Never use the AC adaptor in the bathroom or shower room.
Do not use any power cord or AC adaptor other than this AC 
adaptor (RE9-36).
Charge the appliance in a location where it will not be exposed 
to direct sunlight or other heat sources, at temperatures of 
5 °C to 35 °C.
Plug in the AC adaptor into a household mains socket where 
there is no moisture and handle it with dry hands.

Ź





Ź


Hold the AC adaptor when disconnecting it from the household 
mains socket. If you tug on the power cord, you may damage 
it.
Do not damage or deform the power cord. Do not place heavy 
objects on the power cord or trap it between objects.
Do not use the clipper if the power cord or the AC adaptor is 
worn, or if the AC adaptor does not fit snugly in the outlet.
The power cord cannot be replaced. If the cord is damaged, 
the AC adaptor should be scrapped.

Cleaning the clipper

Warning

Disconnect the power cord from the clipper before 
cleaning it in water to prevent electric shock.

The housing should not be taken apart as this can affect the 
watertight construction of the appliance.
If you clean the clipper with water, do not use salt water or hot 
water. Do not soak the clipper in water for a long period of 
time.
Clean the housing only with a soft cloth slightly dampened 
with tap water or soapy tap water. Do not use thinner, benzine, 
alcohol or other chemicals.
Clean the power plug regularly to remove any dust or dirt.

Storing the clipper

Store the clipper in a place with low humidity after use.
Do not store the clipper where it will be exposed to direct 
sunlight or other heat sources.
Store the AC adaptor in a dry area where it is protected from 
damage.
Keep the oil away from children.

Ź

Ź


Parts identification

 

 

a

b

ER-GC70

ER-GC50

Main body

Dial
a. Scale marks
b. Instruction marks

Charge indicator lamp

 

Power switch [0/1]

Blade block

Cleaning lever

Moving blade

Stationary blade

Mounting hook

Comb attachment [A] 
(1 mm to 5 mm)

Comb attachment [B] 
(6 mm to 25 mm)

Comb attachment [C] 
(26 mm to 45 mm)

 

AC adaptor (RE9-36)

Power cord

Appliance plug

Oil

Cleaning brush

Travel pouch

Accessories

ER-GC70

ER-GC50

Comb attachment [A] (1 mm to 5 mm)

Comb attachment [B] (6 mm to 25 mm)

Comb attachment [C] (26 mm to 45 mm)

-

Travel pouch

-

Charging the clipper

If the clipper is losing speed, it can be fully charged in 8 hours.
A full charge supplies enough power for approximately 40 minutes 
of use.

1. Slide the power switch on the main

body to the “0” position to turn off 
the clipper.

2. Plug in the AC adaptor into a 

household mains socket.

3. Insert the appliance plug into the 

clipper.

The charge indicator lamp lights and 
stays on until the AC adaptor is removed 
from a household mains socket.

4. Disconnect the AC adaptor from a

household mains socket when 
charging is completed.

2

3

1

When charging the clipper for the first time or when it has not been 
in use for more than 6 months, please charge it for 16 hours (in 
order to activate the rechargeable battery). If you charge the 
clipper with the battery completely discharged, the charge 
indicator lamp may not glow immediately. However, the lamp will 
glow normally after charging for a few minutes.

2

3

(5*&B$86LQGG

(

-36)

-36)

Ref.No.IM-B107-01

Отзывы: