<Using with the controller detached>
Remove the controller cord from the cord clips before use.
See EN43 for the method of fixing the controller
holder.
Before starting massage
Adjust the position and orientation of the controller
Position: Front - back can be adjusted by the controller stand.
Orientation: Up - down and left - right can be adjusted
by the controller holder.
Check the legrest position
●
Make sure the legrest is in the fully lowered
position.
( The legrest contacts the floor in the completely
lowered state.)
•
When the legrest is not fully lowered
The legrest will lower by pressing
on
twice.
Slide the sole massage section
to your preferred position
●
Adjust to your preferred position after raising
the legrest.
(See EN16 for Regarding the reclining angle adjustment)
It will slides up to about 18 cm.
Lift your feet slightly and the
sole massage section returns
Push with
your feet to
slide out
Retracted
position of
massage
rollers
Check the surrounding area
Make sure there are no objects, persons, or pets in the vicinity of the unit.
●
The massage lounger may not work when pets such as dogs and
cats chew on or trip over the controller cord. (This may result in a
breakdown.)
The controller can be
brought closer to the
user by detaching the
velcro fastener.
Watch for people and walls
in the surrounding area to
prevent hitting them when
moving the controller
stand to the outer side of
the unit body.
Front/Back
Up/Down
Left/Right
●
The fabric may emit a characteristic odor. It will fade
with use.
EN14
Содержание EP-MAK1
Страница 99: ... MEMO ...