EN48
Q&A
(Continued)
Question
Answer
During Operation
(Continued)
Reclining
The angle of the backrest,
legrest or armrest
automatically changes at
times.
The angle automatically changes in the following cases.
●
When auto course, stretch action or manual action are started.
The chair automatically reclines to the massage position.
The angle does not change if the chair is already reclined to the massage
position or further.
Reclines
around 20 °
Raises
around 75 °
●
When
is pressed to end the massage.
The chair automatically returns to the upright position.
Only the legrest returns to the original position if the massage is
completed according to the timer.
If
is pressed to end the massage, all operations immediately stop
and the angle does not automatically change.
After Use
Hand & arm
Red marks are left on the
under side of my hands/arms
after a hand & arm massage.
Marks may remain on the hands and arms after use. These
eventually fade and are not a problem.
How to adjust the <Position>
Body scanning
*
The correct shoulder position
cannot be found during body
scanning. (The shoulder
position slips each time.)
Correct body scanning may not be possible for some sitting
positions (such as leaning forward).
Adjust the shoulder position using the POSITION button. (Page EN24)
For more correct scanning, sit firmly in the unit and lean back gently so that
your head is touching the pillow (backrest).
* Body scanning = action of measuring the body.
