Panasonic EP-MA82, Руководство по эксплуатации

Страница: 62 / 104

EN12
Assembly
1
Install the remote controller holder on right side of the
product
2
Mount the controller and fix the speaker connection line
❶
Placing the
controller into the
controller stand.
①
Insert it into the
controller holder bottom
in a reclined way.
Sunk position Raising
position
②
Push it into the sunk
positions at two ends
of the controller till two
raising positions of the
controller holder click.
When dismounting
the controller, lift it.
❷
Fasten the speaker connection
line joint with a clip.
●
For better use of the speaker, fix the speaker
connection line joint onto the controller stand clip.
●
There are three types of connectors for speaker
connection lines: 3.5 mm, Type-C, and Lightning,
which can be select the matching connector
according to the type of mobile phone interface
used.
①
■ How to tighten the screws
Attachment screw
Allen key
Hole
● Tighten the 4 screws
lightly using your fingers.
(Make the screws level
with the holes.)
● Tighten firmly with the
alien key.
●
Screw may be damaged
if you tighten the screw
inserted into the hole
crookedly using an alien
key.
Align the 2 prongs of the side panel
with the holes of controller stand.
<Controller Stand> * 4 positions
Controller Stand
lndentations
Protrusions
● ②
Attention:
Do not connect two different types of mobile
phones at the same time, otherwise it will cause
abnormal sound playback.