Panasonic EM234A2CU-PAN, Руководство пользователя

Страница: 11 / 22

Operation (continued)
Cooking
1
If cooking at high power (10),
skip to
step 2. Press P
OWER
L
EVEL
until the desired power
level appears in the display. PL10
is the highest and PL1 is the
lowest.
Press Power Level
once PL10 (HIGH)
twice PL9
3 times PL8
4 times PL7 (MED-HIGH)
5 times PL6 (MEDIUM)
6 times PL5
7 times PL4
8 times PL3 (MED-LOW)/
DEFROST
9 times PL2
10 times PL1 (LOW)
2
Set Cooking Time using the
Number
pads. For all power
levels, the max. working time is
99 mitues,99 seconds.
9
3
Press S
TART
; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps
will sound.
NOTES:
1. For reheating, use PL10 (HIGH)
for liquids, PL7 (MED-HIGH) for
most foods, and P6 (MEDIUM)
for dense foods.
2. For defrosting, use PL3
(MED-LOW).
DO NOT OVERCOOK : This
oven requires less time to cook
than older units. Overcooking
will cause food to dry out and
may cause a fire. A microwave
oven’s cooking power tells
you the amount of microwave
power available for cooking.
Stage Cooking:
For more than one stage of
cooking, repeat steps 1 and
2 for each stage of cooking
before pressing
. The
maximum number of stages
for cooking is three. When
operating, two beeps will
sound between each stage.
Five beeps will sound at the
end of the entire sequence.
Setting a Standing
Time
1
Some recipes call for a standing
time after cooking. To do this,
repeat steps 1 and 2 in the
Cooking section on
Then press T
IMER
.
Note: Do not skip step 1, even use
high power PL10.
2
Set desired amount of stand
time using
Number pads (up
to 99 minutes, 99 seconds).
3
Press S
TART
. The timer will
start and then beep twice at
the end of cooking time (the
beginning of standing time).
Five beeps will sound when
standing time is done.
TURBO
DEFROST
S
TART
the left.