18
English
Maintaining the nanoe™
M and mineral outlet
At least once a month
In order to maintain the generation amount of nanoe™
M and mineral outlet.
1. Prepare a commercially available new cotton swab
(intended for babies) and moisten the tip of the
cotton swab with water.
2. Pinch the tip of the cotton
swab with clean hands and
make the tip thin as shown
in the figure to the right.
3. Gently insert the swab in
the nanoe™ M
and mineral outlet until it
stops (about 1 cm).
4. Turn the cotton swab 2‑3
times carefully.
When turned, you may sense
the swab getting caught, but
this is not an issue.
The tips of the needle‑
shaped part.
Do not put a cotton
swab in any portion
other than the part
indicated by
.
Maintaining the main body
Do this when dirty
To clean the hair dryer (when it is
dirty), soak a cloth in the soapy
water and squeeze it out firmly, then
wipe with the cloth.
►
Notes
• Do not use substances such as
alcohol, nail polish remover or
detergent (hand soap).
Doing so may result in malfunction
or part cracks or discoloration.
• Do not leave the appliance with
hairdressing products or
cosmetics on it.
Doing so may cause deterioration
of the plastic, leading to
discoloration and cracks.
alcohol
polish
remover
EH-NA0J_HK.indb 18
2023/06/01 16:06:51
BLACK
SIZE : 148x105 mm.
PANASONIC : SEHNA0J60503_OL_PROOF2_NUK_2/6/2023
PANASONIC : SEHNA0J60503_ORIGINAL_PROOF1_NUK_2/6/2023
ACROBAT OK
