Panasonic Electric Works Nordic AB
Jungmansgatan 12, SE-211 19 Malmö, Sweden
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99
[email protected] • www.panasonic-fire-security.com
Fire alarm system
EBL512 G3
5000 and 5001
EBL512 G3
-- the third generation of the intelligent analog addressable system EBL512.
Up to
1020
addresses -
512 alarm points
- per control and indicating equipment (c.i.e.)
Redundant network
for up to 30 control units with two TLON networks
Analog addressable system
EBL512 G3 is an intelligent, analog and
addressable
Control and Indicating Equip-
ment for fire detection and fire alarm systems
for buildings
, which conforms to the EN54-2
and –4 standards. The front and a large
display make it very user-friendly. Comes
without or with a built-in printer.
Features / functions
The
EBL512
G3
system meets the most
stringent requirements relating to fire
detection and alarm. The PC software
WinG3
is used to create, edit, download,
upload (backup) the site specific data (SSD),
maintenance, new SW downloads, etc.
Some features / functions:
Adaptation
of each analog detector's
alarm level in relation to its contamina-
tion. Service signal when required.
Alarm algorithms
with filtering to
reduce nuisance alarms. Algorithm for
faster detection of smouldering fires.
Functions,
customer related: Test mode,
Alert Annunciation, disablements, etc.
Functions
: Fire door closing, inter-
locking combinations of outputs &
inputs, time channels, alarm delay, two-
unit dependence, user definable alarm
text for each alarm point, etc.
Programmable inputs and outputs
and
a large number of trigger conditions.
Expansion boards
(options) up to six
boards with conv. zone line inputs
and/or relay outputs.
Interface
for ext. Fire Brigade Panels,
Alert Annunciation Units, etc.
Web-server
1598 (option) can connect
the system to Internet / an Intranet
(LAN) for status presentation and
remote control via a PC (web browser).
Up to 1020 addresses
EBL512 G3 has a capacity of 1020
addresses, of which 128, 256 or 512 are
addresses for alarm points. Can be upgraded
on site, i.e. 128
256
512 alarm points.
Each c.i.e. has four COM loops for
connection of up to 255 units per loop.
Some
loop units
that can be connected:
Analog detectors (sensors)
Addressable manual call points
Addressable short circuit isolator
Addressable input and output units
Addressable siren, sounder base &
beacon
Addressable external power supply unit
TLON Network
Up to 30 EBL512 G3 control units can be
connected in a TLON network. One TLON
connection board 1590 is required in each
c.i.e. Two 1590 for a redundant network.
Miscellaneous
EBL512 G3 has space in the grey metal
cabinet for two 28Ah Sealed Lead-Acid
batteries.
In each c.i.e. can be mounted up to six
expansion boards 4580-4583.