Panasonic DX 1000 - PanaFax B/W Laser Printer, Руководство пользователя

Страница: 57 / 200

53
Programming Auto Dialer Remotely via Email
Using a PC to Update the Auto Dialer Remotely
This feature provides a convenient and an easy way to Update, Backup or Restore the One-Touch and
Abbreviated dialing numbers right from your PC by sending a text email message to the DX-1000.
To activate this feature, change the Fax Parameter No. 91 (REMOTE DIALER UPDATE) to ”2:Valid”. (See
page 64.
The DX-1000 interprets the command that you enter in the ”Subject” line of your email message and performs
one of the following functions, it Retrieves or Stores data into the Auto Dialer (One-Touch and/or ABBR. No.).
The two types of commands that can be entered in the ”Subject” line of your email:
1) To Store data : #set abbr(password)# :
where the password is the Remote Password programmed in the
DX-1000’s User Parameters (i.e. 123456789).
2) To Retrieve data: #get abbr(123456789)#
You can enter One-Touch / ABBR. No. (email addresses or dialing numbers) for the first time if the auto dialer
is empty. However, if the auto dialer contains preprogrammed email addresses or dialing numbers, you
cannot change, add to, or overwrite the preprogrammed data. Any attempt to change or overwrite will be
ignored by the DX-1000.
Preprogrammed One-Touch / ABBR. No. must be erased first with a ”delete” command, which clears the
entire auto dialer, then new data is allowed to be entered. However, before deleting the auto dialer, you should
retrieve the data from the auto dialer first for backup purposes. (See example on page 56)
03005000001
03005020001
03005050002
Note:
03005070001
03005050001
3