R
Q
T
6974
21
Ad
v
a
nce
d
ope
ratio
n
s
See page 20 for menu and option details.
1
Press [SETUP] to show the menus.
≥
The QUICK SETUP screen appears when you press [SETUP] the
first time after purchase (
➜
page 9).
2
Press [
2
,
1
] to select the menu’s tab.
The screen changes to display the menu.
Disc
,.
Video
,.
Audio
,.
Display
,.
Others
^------------------------------------------------------------------------J
3
Press [
3
,
4
] to select the item you want to
change and press [ENTER].
4
Press [
3
,
4
,
2
,
1
] to select the option and
press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
To exit the SETUP menu
Press [SETUP].
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1. Input a 4-digit password with the numbered buttons.
≥
If you enter a wrong number, press [CANCEL] to erase it.
2. Press [ENTER].
≥
The lock symbol appears closed to show the rating is locked.
≥
Do not forget your password.
3. Press [ENTER] to confirm the 4 digits.
[DVD-A] [DVD-V]
You can change the following setting from the Setup menu when you have
connected equipment through this unit’s DIGITAL AUDIO OUT terminal
(OPTICAL). Make sure “Digital Audio Output” is set to “On”.
Select how to output audio with a sampling frequency of 96 kHz or
88.2 kHz.
≥
Select “Yes” if the equipment you connect cannot process signals with a
sampling frequency of 96 kHz or 88.2 kHz.
No (Factory preset):
Output as 96 kHz or 88.2 kHz
Yes:
Converted to 48 kHz or 44.1 kHz
[Note]
≥
Signals are converted to either 48 kHz or 44.1 kHz despite the above
settings if the signals have a sampling frequency of over 96 kHz, or the
disc has copy protection.
≥
Some equipment cannot handle sampling frequencies of 88.2 kHz, even
if they can handle 96 kHz. Read your equipment’s operating instructions
for details.
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
Common procedures
Í
SLEEP
A.SRD
AUDIO ONLY
DEPTH ENH
GROUP
DIRECT NAVIGATOR
TOP
MENU
DISPLAY
RETURN
MENU
PLAY LIST
SKIP
STOP
PLAY
SLOW/SEARCH
CANCEL
SETUP
OPEN/CLOSE
3
2
1
9
8
S
10
0
7
6
5
4
PAUSE
ENTER
RETURN
SETUP
3
,
4
,
2
,
1
ENTER
CANCEL
Numbered
buttons
Disc
SELECT
Audio
Subtitle
Menus
Ratings
English
English
Automatic
Level 8
SETUP
TAB
Entering a password (Ratings)
Digital output
PCM Down Conversion
Dolby Digital and DTS Digital Surround
Now, when you insert a DVD-Video that exceeds the ratings limit you
set, a message appears on the television.
Follow the on-screen instructions.
