Panasonic DVD-LS91PP, Руководство по обслуживанию

Страница: 25 / 78

Error code Contents Case of Occurrence Task Remarks
F0BF No playback because physical
layer cannot be detected Media identification impossible
(examples)
1.
Detection impossible due to inferior disc non-compliant
with specifications
2. CDV or other unsupported media
3. Disc was inserted upside down.
Drive Registration
F600 Management data is
inaccessible because of a
demodulation error.
Data necessary for NaviPack and other navigation transfers
became impossible to acquire due to a damaged disc and
other causes, and playback transfer became impossible. ECC Registration
F601 Unstable sector ID was
requested
Attempt was made to access a non-existent disc location
due to authoring record and other errors. ECC Registration
F603 KEYDET acquisition
impossible due to
demodulation error.
Data for decrypting copyright protection (CSS) became
impossible to acquire due to a damaged disc or other
causes, playback is not possible. ECC Registration
F700 MBX Overflow Incorrect processing error within microcomputer
Occurs mainly in cases where microcomputer software has
a problem. AV MSG_QOVR
F701 Message command not
complete error
Incorrect processing error within microcomputer
Occurs mainly in cases where microcomputer software has
a problem. AV MSG_NOTCOMP
F702 Message command changed Incorrect processing error within microcomputer
Occurs mainly in cases where microcomputer software has
a problem. AV MSG_CMDCHG
F740 When HDMI device key writing
failed I2C error occurred while writing to Device Key in Tx. AV
F750 When the HDMI Device Key
was wrong Occurs when the wrong Device Key is written into Tx. AV
F890 Tried to send message during
transmission to AV task Player system error Disc Player control software
operation is abnormal
F891 Message transmission to AV
task failed (Mailbox overflow,
etc.) Player system error Disc Player control software
operation is abnormal
F893 Flash data falsification error When an error is found in Flash ROM data Sys
F894 EEPROM error When accessing EEPROM failed Sys Subsite value eutered with
INITIALI.C immediately
F895 Firm type disagreement
(destination mismatch)
When the destination and type of used firm differ Sys Defined in DEFMAIN.H
F896 Firm type disagreement (non-
existent jumper) When a jumper falling under no type is set Sys Defined in DEFMAIN.H
F897 Incomplete initialization When initialization is not performed after firm writing Sys Defined in DEFMAIN.H
F898 Disagreement between the AV
Dec hardware version and the
system controller firm type When the destination and type of used firm differ Sys
F899 Disagreement between system
controller and panel controller
communication specifications Mismatch in firm/product numbers for the system controller
and panel controller used Sys Panel Mounted on D9-generation
and newer models
F8A0 Message command is
improper
Player system error Disc Player control software
operation is abnormal
0xB000 Target file was not found DVD-RAM disc management data error
(recorded in the DVD-VR format) Disc
0xB001 Disc is not DVD-RAM or RW DVD disc management data error Disc Set when UDF
management data error
occurs
0xA002 For hang-up prevention, no
error. CD mediaDisc management data error Disc Set for hang-up prevention
when the ISO9660 pass
table
for CD-ROM is
abnormal.
Note:
An error code will be canceled if a power supply is turned OFF.
*1: CPPM is the copy guard function beforehand written in the disc for protection of copyrights.
25
DVD-LS91PP