∫
To confirm the battery charge on the
LCD
Press [DISPLAY].
The battery display appears on the LCD for
a few seconds.
It roughly shows the remaining charge.
∫
If play time dramatically reduces after
recharging
The battery has reached the end of its
service life (it can be recharged about
300 times).
∫
If the unit is not to be used for a long
time
≥
Detach the battery. (Even if the unit is off,
it still uses some power. This can lead to
over discharging of the battery and
malfunction.)
≥
Recharge the battery when you are ready
to use it again.
∫
To detach the built-in battery
∫
(When the unit is off)
1
Slide and lift the latch.
2
Lift the battery out of the unit.
Getting Started
11
RQT6025
≥
Charge the battery before using it for the
first time.
≥
For replacement, see page 4 “Optional
accessories”.
∫
To recharge the built-in battery
∫
(When the unit is off)
Connect to the household AC outlet while
the battery is attached (see left).
CHG
Full
Low
Recharge
Using the built-in battery
(Lithium ion battery pack)
Note
Refer to “IMPORTANT SAFETY
INSTRUCTIONS” on pages 6 and 7.
∫
Approximate recharging and play
times
(Actual times depend on operating
conditions)
Recharging
Front of this unit
The [CHG] indicator lights.
The [
Í
] indicator goes out.
1
2
Built-in
battery
Bottom of
the unit
Bottom of
the unit
Note
After detaching the built-in battery, take care
when handling the unit.
∫
To attach the built-in battery
∫
(When the unit is off)
1
Insert the battery’s flange into the slot in
the compartment.
2
Push the battery so it clicks into place.
Lock release button
(This appears automatically when there is
about 10 minutes of charge remaining.)
1
2
Built-in battery
Recharging is complete when [CHG]
goes out. (The [
Í
] indicator lights.)
Disconnect the AC power supply cord
and AC adaptor.
Recharging
[at 20
o
C
(68
o
F)]
3 hours
3 hours
3 hours
LCD
brightness
level
j
5
0
5
LCD on
2 hours
30 minutes
2 hours
1 hour
30 minutes
LCD off
3 hours
30 minutes
3 hours
30 minutes
3 hours
30 minutes
Play time
≥
Brightness is factory preset to “0”.
≥
To change the LCD brightness
(
➡
page 19).
For longer use
Power the unit together with the optional
battery pack (
➡
page 35).
f
}