1. Remove the trim ring by pulling down the mounting
springs. (Squeeze mounting spring and pull down
carefully.) (Fig. 10)
2. Clean the trim ring. (Don’t put into hot water.
Use non-abrasive kitchen detergent, wipe dry with
clean cloth.) (Fig. 11)
Fig. 11
Gloves
Trim ring
Fig. 10
Trim ring
2-Mounting
springs
Gloves
Ceiling
Fig. 9
2-Mounting
springs
Trim ring
2-Slots
13. Insert the mounting springs into the slot as
shown in the figure and attach the trim ring
to the fan body. (Fig. 9)
Do not immerse motor in water when cleaning.
Do not soak resin parts in water over 140
°
F (60
°
C).
7
INSTALLATION (BETWEEN JOISTS MOUNTING) CONTINUED
MAINTENANCE (CLEANING)
CAUTION
WARNING
Disconnect power source before working on
unit. Routine maintenance must be done
every year.
Never use gasoline, benzene, thinner or any other
such chemicals for cleaning the ventilating fan.
4. Remove dust and dirt from fan body using a vacuum
cleaner. (Fig. 12)
3. Dry the trim ring after cleaning.
6. Replace the trim ring. (Fig. 9)
5. Using a cloth dampened with kitchen detergent,
remove any dirt from fan body. Wipe dry with clean
cloth. (Fig. 13)
Fig. 12
Fig. 13
Gloves
Vacuum
cleaner
Disconnect power source before working on unit.
This is a GU24 type lamp base and the lamp is fragile and heavy. Please handle with care.
Make sure the temperature of lens and lighting unit has cooled down before maintenance
(cleaning) or replacement of lamp.
MAINTENANCE (REPLACEMENT OF LED LAMP)
WARNING
1. Remove the trim ring by pulling down mounting springs.
(Squeeze mounting spring and pull down carefully.)
(Fig. 10)
4. Replace the trim ring. (Fig. 9)
2. Remove the LED lamp. (Fig. 14)
3. Replace the 11 W BR30 shape LED lamp (model
:
11BR30G4DIM
/
927
/
GU24, from the company
Green Creative). (Fig. 8 of page 6)
Fig. 14
LED lamp
1
2
