GENERAL SAFETY INFORMATION CONTINUED
Extreme
bending
Prohibited
Prohibited
Prohibited
Prohibited
Floor
45°
45
°
Adaptor
(Cooking area)
Do not install above
or inside this area
Cooking
equipment
Bend
repeatedly
Duct
narrow
Bend near
adaptor
This product must be properly grounded.
Make sure that the electric service supply voltage is AC 120 V, 60 HZ.
Protect the supply wiring from sharp edges, oil, grease, hot surfaces,
chemicals or other objects.
Do not kink the supply wiring.
Provide make up air for proper ventilation.
Not for use in cooking area. (Fig B)
Fig B
Fig A
The special-purpose or dedicated parts, such as mounting fixtures,
must be used if such parts are provided.
Do not install the unit where ducts are configured as shown
in Fig A.
For general ventilating use only. Do not use to exhaust hazardous
or explosive materials and vapors.
Always disconnect the power source before working on or near the fan,
motor, light fixture or junction box.
Follow all local electrical and safety codes, as well as the National
Electrical Code (NEC) and the Occupation Safety and Health Act (OSHA).
Do not install this ventilating fan where interior room temperature
may exceed 104
°
F (40
°
C).
3
This product uses a sirocco fan driven by a capacitor motor.
DESCRIPTION
This Panasonic ventilating fan model is listed by UL under UL file No. E78414.
The motor is designed to have an extended service life with reduced energy consumption.
The lighting unit is an energy-saving, lighting device that uses one 11 W BR30 shape LED lamp (model
:
11BR30G4DIM
/
927
/
GU24, from the company Green Creative) and produces almost the same
illumination as a standard 65 W incandescent lamp.
It also incorporates a thermal-cut off for safety. The trim ring is a spring-loaded, quick remove type. A
damper for preventing air counterflow is provided. The blower uses a high-capacity sirocco fan
developed to reduce the noise level.
FCC Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning this
product on and off, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect equipment into outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The product
must
use
LED
lamp (model
:
11BR30G4DIM
/
927
/
GU24)
from
the company
Green
Creative.
Please wear gloves when installing or cleaning the fan.
WARNING
CAUTION
