Panasonic DTS-1800-U6GPDR, Инструкции по установке

Страница: 6 / 12

NOTE:
1. For correct operation of this function the DTS1810S base station must have an analogue Genlock signal
connected.
2. The Composite video connected to the Composite Return Video Input at the base station must be locked to
this same Genlock reference.
3. The Genlock output from the Fibre Adaptor must be connected to the Genlock Input of the camera.
12. MONITOR INPUT.
The MON BNC Input allows a composite video signal to be input to the fibre adaptor and transmitted to the
base station. When no video is connected the Fibre Adaptor generates a test pattern that is transmitted to the
base station.
13. INCOM 1.
The Intercom 1 connector is for connection of a headset.
14. INCOM 2.
The Intercom 2 connector is for connection of a second headset.
1810-U6GPD Base Station.
1. HD OUT.
The HD OUT connector has been configured to provide the 1.5G Viewfinder Monitor channel to display status
and allow access to camera menus remotely.
2. HD IN.
The HD IN Connector is used for input of the 1.5G Return/Sync Video Signal.
3. OUT 1 to Out 4.
The OUT1 to OUT4 connectors provide the 3G or QL3G outputs.
4. OUT 6G1 & 6G2/SL12G (OPTION.)
The OUT 6G1 & 6G2/SL12G connectors provide either 3G, Dual Link 6G or Single Link 12G debayered
Programme Video outputs.
5. CAM & ERI RJ45 Ethernet Connections.
Provides an Ethernet channel for Panasonic ROP.
When installed with an ERI performing protocol translation this is linked to the ERI Ethernet Port with the
supplied Flat Ethernet Cable (Please see installation section below.)
6. REMOTE/RS422.
15 Way D-type Camera Control and RS422 channel.