manualshive.com logo in svg

Panasonic DP-3530, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DP-3530 Скачать руководство пользователя страница 444

444

JAN 2006

Ver. 5.2

DP-3510/3520/3530/4510/4520/4530/6010/6020/6030

9.5.5.

A (Address) Record

The A (Address) Record, lists the addresses for a given machine. The name field is the machine’s name 
and the address is the network address. There should be one A record for each address on the machine.

9.5.6.

PTR (Pointer) Record

Pointer records are the reverse-lookup file entries that enable IP addresses to be resolved to host names. 
DNS is used to resolve host names to IP addresses, so the opposite process is called reverse lookup. 

They specify the IP address in reverse order (like a DNS name, with the most specific information first) and 
then corresponding host name. The files are named according to the class of network, but with the octets in 
reverse order. The syntax for a PTR record is shown below:

<ip reverse domain name> IN PTR <host name>

9.5.7.

CNAME (Canonical Name) Record

The CNAME (or canonical name) record is an alias (nickname), enabling you to specify more than one 
name for each IP address. The syntax of a CNAME is shown below:

<alias name> CNAME <host name>

Using CNAME records, you can combine an FTP and a Web server on the same host. Nicknames are 
useful when a well-known host changes its name. In this case, its usually a good idea to have a CNAME 
record so people still using the old name, will get to the right place.

A Record (Bind 4.9.5 for NT) in "db zone.info" file

 ; BIND version named 4.9.5-Rel+-Monday-dd-Month-yy

; BIND version GregSchueman-LarryKahn-VirajBais
; zone  ' rdmg.pcc.co.jp'   last serial 720
; from  133.185.245.7   at Sun Mmm dd:11:35 yyyy

 $ORIGIN pcc.co.jp.

rdmg                IN         SOA       nwmgr.pcc.co.jp. postmaster.rdmg.pcc.co.jp. (
                       721 10800 3600 604800 86400 )
                        IN          NS        nwmgr.pcc.co.jp.

                         IN          MX       10 mlsv2.rdmg.pcc.co.jp.

$ORIGIN rdmg.pcc.co.jp.
ifax-gz03          IN           A         172.21.94.216
qmc-cco1         IN           A         133.185.254.212
ifaxos01
ifpdyna

IN           A         202.244.202.29

IN           A         172.21.97.26

PTR record (Bind 4.9.5 for NT) in "db.127.0.0" file.

           IN NS      nwr42.rdmg.pcc.co.jp.
 1        IN PTR      localhost.rdmg.pcc.co.jp.

;

Содержание DP-3530



























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды