manualshive.com logo in svg

Panasonic DP-2330, Руководство по обслуживанию

Поделиться
Скачать
Panasonic DP-2330 Скачать руководство пользователя страница 98

98

DP-2330/3030

MAR 2005

Ver.2.1

DP-2310/3010

(2) 

For PCL Option

The PCL Control Program (2) must be written into the 4 MB onboard, which is assigned as ROM 
Code (B). The PCL Control Program (3) and PCL Font data (4) are written into the 8 MB in the 
SLOT 1. The Firmware (3) and (4) are assigned as ROM Code (C).
When using 8 MB Flash Memory Card, the 8 MB Program (C) can be written onto one card.
When using 4 MB Flash Memory Card, the 8 MB program (C) must be divided onto 2 cards, one 4 
MB card for the PCL Control Program (3) and one 4 MB card for the PCL Font data (4).

(3) 

For PS Option

The PS Control Program must be written into the 4 MB onboard, which is assigned as ROM Code 
(D). The PS Control Program (6) and (7) are written into the 8 MB in the SLOT 1. 
Both Firmwares (6) and (7) are assigned as ROM Code (E). 
When using 4 MB Flash Memory Card, the 8 MB program (E) must be divided onto 2 cards, one 4 
MB card for the PS Control Program (6) and one 4 MB card for the PS Control Program (7).

C. SPC PC Board Firmware

The 512 KB Program Memory (F-ROM) is integrated on the SPC PCB. The Programs for Scanner 
Control and Printer Control are saved on the Board. The Firmware is transferred as Serial Data from 
the SC PCB.

D. Panel (PNL) PC Board Firmware

The 4 MB Program Memory (F-ROM) is integrated on the PNL PCB. The Programs for Key Scan, 
Display Control, Energy Save Control, Bitmap Data and Font Data are saved on this Board. The 
Firmware is transferred as Serial Data from the SC PCB.

E. Firmware Updating Ports

Three (3) types of Ports are available for updating the firmware.

(1) Ethernet LAN Port (The Quickest and Most Easiest Method)

The machine's Firmware can be updated from a PC via Local Area Network (LAN). Refer to the 
Firmware Update Operation Instructions, Service Notes (8.1.) for additional details.

(2) USB Port (Alternate)

The machine's Firmware can be updated from a PC via USB Port. The Master Firmware Card can 
also be created from a PC using the USB Port. Refer to the Firmware Update Operation 
Instructions, Service Notes (8.1.) for additional details.

(3) Flash Memory Card (Alternate)

The machine's Firmware can be updated using the Master Firmware Card. The Master Firmware 
Card can be created by copying the Firmware from an existing machine's SC PCB using a 4 MB or 
8 MB Flash Memory Card. 
To update the SC, SPC and PNL PCB, 3 Flash Memory Cards are required for the Standard 
configuration or 5 Flash Memory Cards for the PCL or PS/PCL configuration.

Содержание DP-2330







































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды