4
Before Starting
Safety Information
This symbol is used to alert operators to a
heated surface that may cause burns and
requires close attention.
Never touch a labelled area. You can get
burnt. If a sheet of paper is wrapped around
the heat roller, do not try to remove it yourself
to avoid injuries or burns. Switch Off the
machine immediately, and contact the
authorized Panasonic dealer.
Do not use conductive paper, ex: folding
paper, carbon paper and coated paper. When
a misfed paper occurs, they can cause a short
circuit and fire.
Do not place any heavy object on the
machine. An off-balance machine can tip-over
or the heavy object can fall, causing damage
and/or injuries.
Keep the room ventilated when using the
machine for an extended period of time to
minimize the ozone density in the air.
When copying with the ADF open, do not look
directly at the exposure lamp. Direct eye
exposure can cause eye fatigue or eye injury.
When removing misfed paper, make sure that
no pieces of torn paper are left in the
machine. A piece of paper remaining in the
machine can cause fire. If a sheet of paper is
wrapped around the heat roller or when
clearing a misfed paper that is difficult or
impossible to see, do not try to remove it by
yourself. Doing so can cause injuries or
burns. Switch Off the machine immediately,
and contact the authorized Panasonic dealer.
Never open or remove machine covers that
are secured with screws unless specifically
instructed in the “Operating Instructions”. A
high-voltage component can cause electric
shocks.
Do not try to alter the machine configuration
or modify any parts. An unauthorized
modification can cause smoke or fire.
Consumable Safeguards
Never dispose of toner, toner cartridge or a
toner waste container into an open flame.
Toner remaining in the cartridge can cause an
explosion, burns and/or injuries.
Operating Safeguards
Do not touch areas where these caution labels
are attached to, the surface may be very hot
and may cause severe burns.
Do not place any liquid container such as a
vase or coffee cup on the machine. Spilt
water can cause fire or shock hazard.
Do not place any metal parts such as staples
or clips on the machine. If metal and
flammable parts get into the machine, they
can short-circuit internal components, and
cause fire or electric shocks.
If debris (metal or liquid) gets into the
machine, switch Off and unplug the machine
immediately. Contact the authorized
Panasonic dealer. Operating a debris-
contaminated machine can cause fire or
electric shock.
Installation and Relocation
Cautions
Do not place the machine near heaters or
volatile, flammable, or combustible materials
such as curtains that may catch fire.
Do not place the machine in a hot, humid,
dusty or poorly ventilated environment.
Prolonged exposure to these adverse
conditions can cause fire or electric shocks.
Place the machine on a level and sturdy
surface that can withstand a weight of
the machine. (The machine weight without
optional unit : 43.6 k
g
) If tilted, the machine
may tip-over and cause injuries.
When relocating the machine, contact the
authorized Panasonic dealer.
When moving the machine, be sure to unplug
the power cord from the outlet. If the machine
is moved with the power cord attached, it can
cause damage to the cord which could result
in fire or electric shock.
Operating Safeguards
Do not place a magnet near the safety switch
of the machine. A magnet can activate the
machine accidentally, resulting in injuries.
Do not use a highly flammable spray or
solvent near the machine. It can cause fire.
When copying a thick document, do not use
excessive force to press it against the platen
glass. The glass may break and cause injuries.
CAUTION
Downloaded From ManualsPrinter.com Manuals
