61
RQT9307
Tips
To browse through the list
Press [
CH].
DVB Auto Setup
You can restart auto channel setting for digital terrestrial channels if
the setup (
¼
13) fails for some reason.
However, if you perform “DVB Auto Setup”, all channel settings and
all the timer recording programmes are deleted. (All the settings
except for the ratings level, ratings password, Owner ID and Clock
return to the factory preset.) Recordings on the HDD are not be
deleted.
When the con
fi
rmation screen appears
Press [
] to select “Yes”, then press [OK].
Tips
You can also use the following method to restart Auto-Setup.
When the unit is turned on and stopped, press and hold
[CH
] and [CH
] on the main unit simultaneously for about
5 seconds.
–Auto-Setup screen appears.
DVB Manual Tuning
You can set channels manually if the “DVB Auto Setup” could not be
completed successfully.
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Others
OK
RETURN
TAB
SELECT
Favourites Edit
DVB Auto Setup
DVB Manual Tuning
Add New DVB Channels
Signal Condition
DVB Preferred Multi Audio
DVB Preferred Subtitles
English
English
DVB Manual Tuning
RETURN
START SCAN
CH
Frequency
MHz
No.
New
Channel Name
Type
0
10
0
10
[CH54]
738.0
Signal Quality
Signal Strength
TV: 0 Radio: 0 Data: 0
1 Press [
,
] to select the channel you want to set.
– Select the channel by checking the signal strength and signal
quality displays.
[Refer to “Signal Condition” (
¼
right) for signal strength and signal
quality.]
DVB Manual Tuning
RETURN
START SCAN
CH
Frequency
MHz
No.
New
Channel Name
Type
0
10
0
10
[CH54]
738,0
Signal Quality
Signal Strength
TV: 15 Radio: 4 Data: 0
8 DVB channels found.
BBC ONE Wales
BBC 2W
BBC NEWS 24
BBC Radio Wales
ITV
1
2
3
4
5
TV
TV
TV
Radio
TV
-
-
-
-
-
2 Press [OK] to start scan.
The set channel is displayed in the
table.
3 Press [EXIT], then press [
CH] to check that applicable
channels have been selected.
Add New DVB Channels
You can search for newly added digital terrestrial channels to
receive.
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Others
OK
RETURN
TAB
SELECT
Favourites Edit
DVB Auto Setup
DVB Manual Tuning
Add New DVB Channels
Signal Condition
DVB Preferred Multi Audio
DVB Preferred Subtitles
English
English
Add New DVB Channels
RETURN
Scan
CH 21
68
Channel Name
Searching...
CH
Type
Quality
TV: 15 Radio: 4 Data: 0
BBC ONE Wales
27
TV
9
BBC 2W
27
TV
9
BBC NEWS 24
27
TV
9
BBC Radio Wales
27
Radio
9
– The unit starts searching for newly available digital terrestrial
channels. This takes about 5 minutes.
– The bar over the table shows you the search progress. At the end of
the search, the number of found new digital stations appears.
– “No new DVB channels found.”, is displayed when no new channels
can be found.
Press [OK] to save the newly found channels.
Tips
To cancel in middle
Press [RETURN ].
The channels found before stopping are not saved.
Signal Condition
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When “Signal Condition” is displayed in grey and cannot be
selected:
1 Press [EXIT] to exit the screen.
2 Press [
CH] to select a digital channel. “D” appears on the unit’s
display.
3 Display the Setup menu again.
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Others
OK
RETURN
TAB
SELECT
Favourites Edit
DVB Auto Setup
DVB Manual Tuning
Add New DVB Channels
Signal Condition
DVB Preferred Multi Audio
DVB Preferred Subtitles
English
English
Signal Quality
0 10
Signal Strength
0 10
RETURN
C
Channel –
[CH54] 20 BBC ONE Wales
DVB Channel
DVB Signal Condition
The quality and strength of the signal are shown.
Press [
CH] to select the channel.
Signal Quality
Below 2 (display red)
The signal quality is so poor that there
may be interference in the pictures and
sound.
2–5 (display orange)
The signal quality is basically adequate,
but brief interference in the pictures and
sound is possible in isolated case.
Over 5 (display green)
Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. “0” means signal strength 0%,
“10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal ampli
fi
cation at your aerial.
When the signal is weak:
– check that the aerial is correctly positioned.
– adjust the aerial reception with “DVB Manual Tuning” in the Setup
menu (
¼
left).
– check that the current digital broadcast channel is correctly
broadcasting.
DVB Preferred Multi Audio
Choose the audio language for digital broadcast.
If the selected language is not available, then the original language
will be selected.
[English] [Welsh] [Gaelic]
DVB Preferred Subtitles
Choose the subtitle language for digital broadcast.
If the selected language is not available, then the original language
will be selected.
[English] [Welsh] [Gaelic]
[English for hearing impaired]
[Welsh for hearing impaired]
[Gaelic for hearing impaired]
Setting Menus
DMR-EX769EB.indb 61
DMR-EX769EB.indb 61
2009/01/26 17:06:21
2009/01/26 17:06:21
