79
RQT9058
No sound.
Low
v
olume.
Distorted sound.
Cannot hear the desired
audio type.
Check the connections and the “Digital Audio Output” settings. Check the
input mode on the amplifier if you ha
v
e connected one.
56, 65
Check audio/
v
ideo (AV) cables.
8
Check if TV is muted.
−
Check if amplifier is muted.
−
Press [AUDIO] to select the audio.
29, 35
Sound is not output while fast-forwarding during chasing playback and
simultaneous record and playback.
−
Set “V. Surround Sound” in the Audio menu to “Off” in the following cases:
–
W
hen using discs that do not ha
v
e surround sound effects, such as
Karaoke discs
–
W
hen playing multilingual broadcast recordings
51
The sound effects will not work when the bitstream signal is output from the
HDMI AV OUT terminal or the DIGITAL AUDIO OUT terminal.
−
Audio may not be heard when more than 4 de
v
ices are connected with
HDMI cables. Reduce the number of connected de
v
ices.
−
W
hen the DIGITAL AUDIO OUT terminal is used for audio output and the
unit is connected to the tele
v
ision with an HDMI cable, set “HDMI Audio
Output” to “Off” in the Setup menu.
60
Depending on the connected e
q
uipment, the sound may be distorted if this
unit is connected with an HDMI cable.
−
Cannot switch audio.
If you want to switch between the main audio or SAP audio, then output
both audio signals from the external e
q
uipment connected to this unit and
record the program on a DVD-RAM or Video tape.
21
You ha
v
e used a digital connection. Set “Dolby Digital” to “PCM” or connect
using an audio cable (analog connection).
56, 65
There are discs whose audio cannot be changed due to how the disc was
created.
−
Playback Issues
Sound
Page
Ref
erence
DMR-EA38VP.indb 79
DMR-EA38VP.indb 79
2007/12/28 9:27:10
2007/12/28 9:27:10
Downloaded from
www.Manualslib.com
manuals search engine
Downloaded From DvDPlayer-Manual.com Panasonic Manuals
