18
RQT9434
STEP
3
Channel reception settings and TV aspect settings
1
Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2
Press [
Í
] to turn the unit on.
Language setting screen appears on the television.
3
Press [
3
,
4
] to select the language
and press [OK].
Country setting screen appears on the television.
4
Press [
3
,
4
] to select the country and
press [OK].
Dish Setup screen appears on the television.
5
Press [
3
,
4
] to select the number of
cables to connect and press [OK].
(
>
22, About 2 programmes recorded simultaneously)
≥
Two cables ( Same signal ):
Select this item when connecting two cables outputting
same signal to both LNB IN 1 and LNB IN 2.
≥
One cable:
Select this item when connecting only one cable to
LNB IN 1.
Search Mode screen appears on the television.
6
Press [
2
,
1
] to select the Search
Mode.
≥
All Channels:
Search for all channels.
≥
Free Channels:
Search for free channels only.
7
Press [OK].
Auto Setup starts.
Searching Satellite
#
Searching Channels
≥
These operations may take some time.
After Auto Setup is complete, the time information can be
obtained and Power Save setting screen appears.
8
Press [
3
,
4
] to select “On” or “Off”
and press [OK].
≥
On:
It will go into the Power Save mode when the power is
turned off.
≥
Off:
It is possible to start quickly from standby mode.
The features of the power save function when the unit is in
standby mode are as follows.
§
1
“Unit’s Display” is fixed to “Automatic” in the Setup menu.
(
>
92)
§
2
“Unit’s Display” is changed to “Bright” in the Setup menu.
§
3
It is possible to startup and start recording within several
seconds.
– Depending on the type of TV or the connected terminal, it
may take time to display the screen.
After Power Save setting is complete, TV aspect setting
screen appears.
TIME SLIP
DISPLAY
STATUS
DIRECT TV REC
AUDIO
REC MODE EXT LINK
REC
TEXT
STTL
CREATE
CHAPTER
FUN
CT
IO
N M
EN
U
DIR
EC
T N
AV
IGA
TO
R
GUIDE
RETURN
PLAY/x1.3
PAUSE
STOP
SLOW/SEARCH
SKIP
PROG/CHECK
CH
PAGE
SELECT
INPUT
CH
AV
TV
DRIVE
SELECT
DEL
MANUAL SKIP
EXIT
OK
OPTION
VOL
0
2
abc
5
jkl
8
tuv
1
4
ghi
7
qrs
p
3
def
6
mno
9
xyz
w
RETURN
EXIT
FUNCTION
MENU
,
,
,
OK
Power Save
On
§
1
Off
§
2
Power
consumption
Approx. 0.3 W
Approx. 7 W
Start up time
Not Quick
Quick
§
3
Auto Setup
RETURN
Satellite
Progress
0%
100%
This will take up to 40 minutes.
Checking LNB1
Satellite
LNB in 1
LNB in 2
Press RETURN to skip Satellite installation
Searching Satellite
Checking...
Checking...
OK
RETURN
Power Save
On
Off
On: Minimises standby power consumption,
disables Quick Start function. Unit’s Display
is set to "Automatic".
Off: Enables Quick Start function.
DMRBS850&750EG-RQT9434-L_eng.book 18 ページ 2010年1月14日 木曜日 午後4時21分